|
Minsterstone manufacture architectural stone in both semi-dry and wet cast process to the following specification:
Semi-dry cast stone
A high quality product manufactured using crushed natural stone. A hand
crafted product, hand cast into moulds and hand finished by qualified
stonemasons. Once cast, differing degrees of finishing can be applied
by grinding the stone or acid etching. With a content of at least 80%
natural stone our architectural stone is designed to give the client
the highest available resemblance to natural stone. Traditional carving
and tooling may be carried out on this type of architectural stone
product.
Aggregate size 5mm to dust
Strength in excess of BS1217, 25N/mm2 at 28 days
Repairability Easy to invisibly repair
Wet cast stone
A wet cast product is designed to achieve a comparable appearance to
natural stone with excellent strength and durability. With stone
paving, standard slab sizes are produced with a tapered edge and when
placed together produce a 10mm joint. Wet cast products are generally
finished by acid etching.
Aggregate size All sizes from 20mm to dust
Strength Not less than 40N/mm2 at 28 days
Repairability May be repaired
Minsterstone offer a wide range of architectural stone and concrete solutions including: Structural Stone, Pre-cast concrete & Stone Cladding.
|
